DTX-1800 INTL

As you know, when a signal enters the copper cables, a large magnetic field is created, which causes the electrons of the pairs to collide with each other due to the creation of this magnetic field and creates a series of line loss parameters. Each of these parameters can represent a problem or an important event in the cable. Events such as the quality of the copper cable, the way the copper cable is terminated, both qualitatively in terms of punching and coloring, etc., the resistance of the cable and other parameters that arise due to different formulas.

It is important to measure each of these parameters in different standards and in different categories.

– Compliance with various international standards such as EN, TIA, ISO, etc. is another feature of this device.

– You can test the longest standard cable (90 meters) in the longest possible time (9 seconds).

– It is possible to support testing up to 900 MHz frequency in this device.

– In addition, you can see the tests both numerically and graphically.

– You can add multi-mode (MFM2) and single-mode (SFM2) modules for fiber optic testing. In addition, you can use the newest module of this device, the OTDR module, to accurately diagnose the location of fiber optic faults such as Bend, Coupling and cable breaks.

– To place an order for this device, you must use the following technical number:

To know the price of the product, you can contact the product support unit, (contact us)

 

 

Technical Specifications

ویژگی توضیحات
Cable Types

Shielded and unshielded Twisted Pair (STP, FTP, SSTP and UTP) LAN cabling:

TIA Category 3, 5, 5e, 6 and 6A : 100 Ω
ISO/IEC Class C and D: 100 Ω and 120 Ω
ISO/IEC Class E, EA, F and FA: 100 Ω
Standard Link Interface Adapters

Cat 6A/Class EA permanent link adapters:

TIA Cat 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA permanent link
Cat 6A/Class EA channel adapters:

TIA Cat 3, 4, 5, 5e, 6, 6A and ISO/IEC Class C, D, E and EA channels
Test Standards

TIA Category 3, 5e, 6 & 6A per ANSI/TIA-568-C.2
TIA Category 5 per TIA TSB-95
TIA TSB-155 (DTX-1500, DTX-1800 only)
ISO TR 24750 (DTX-1500, DTX-1800 only)
ISO/IEC 11801 Class C, D, and E, EA & F
(EA: DTX-1500, DTX-1800 only)
(F: DTX-1800 only)
EN 50173 Class C, D, E, EA & F
(EA: DTX-1500, DTX-1800 only)
(F: DTX-1800 only)
ANSI TP-PMD
IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
IEEE 802.3 10GBASE-T
DTX-1500, DTX-1800 only
Supported Tests Parameters

(The selected test standard determines the test parameters and the frequency range of the tests)

Wire Map
Length
Propagation Delay
Delay Skew
DC Loop Resistance
Insertion Loss (Attenuation)
Return Loss (RL), RL @ Remote
NEXT, NEXT @ Remote
Attenuation-to-crosstalk Ratio (ACR-N), ACR-N @ Remote
ACR-F (ELFEXT), ACR-F @ Remote
Power Sum ACR-F (ELFEXT), PS ACR-F @ Remote
Power Sum NEXT, PS NEXT @ Remote
Power Sum ACR-N, PS ACR-N @ Remote
Power Sum Alien Near End Xtalk (PS ANEXT)
Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)

Languages Supported

English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese, Traditional Chinese, Korean, Russian, Czech, Polish, Swedish, Hungarian.
Calibration

Service center calibration period is 1 year

Product order

Reviews

There are no reviews yet.

Be the first to review “DTX-1800 INTL”

Your email address will not be published. Required fields are marked *

Scroll to Top